iGlass™ Specification

Glass Type Float, Heat Strengthened, ToughenedMade to customer’s request
Standard laminated iGlass 4mm Clear float + 1.2mm (0.4 EVA + 0.4 iGlass + 0.4 EVA) + 4mm Clear Float = 9.2mm total thickness
Maximum size 1400 x 3000mmLonger length may be available for narrower width
Variation Toughened, heat strengthened, double glazed

  • Varying thickness (thicker EVA required for toughened)
  • Varying appearance (roll-band from toughened – market acceptable grade) may be visible
  • Performance – according to the glass make up plus the film-please check individual glass performance
Shapes and Cut-outs Possible with accurate CAD file drawingHoles for door fittings

Different shapes for different window shape

Butt-Join Possible with only approved sealants as specified in the installation manual
Exposed edges to constant water Not allowed – potential cause for delamination
Operating Temperature -5°C to 60°CAbove 60°C, thermal transition occurs, glass starts to become transparentFully transparent at 85-90°C

 

Thickness (as one single laminated glass) 9.2mm – 18mm
Position of Bus Bar (electrical Copper connection) Top of panel (unless otherwise specified)
Wire from Bus Bar Encapsulated inside the glass laminate (24-26AWG PTFE, 300V,6A) single coreLength = 250-300mm
Bus bar width from edge of glass to edge of bus bar 10-12mm

 

POWER DRIVER

Size

NF-C100-IG

130mm x 50mm x 80mm

Input Power

(240V plug-in plug attached to 1.5m 240V wire)

Data

Voltage/Frequency/Voltage range/Load

AC230/240V50/60HzAC207-253VMax 0.5A

Output Power

(toroidal transformer built-in)

Dual core, 2m, 110V wire attached to output

Voltage/frequency/Voltage range/Current

AC110V50/60HzAC99-121VMax 1A rms
Power Relay Unit (built-in)
  • Excess Voltage protection of output (max 140V)
  • Higher current protection
  • Power surge and spark protection from input power
  • Thermal protection from overheating
Operating temperature for installed environment -10°C to 50°C
Humidity 20-85%
Standards CE, C-tick approved

 

Electro-Optical Information*

iGlass (ASTM D1003)

ON/Max

OFF/Min

Light Transmission 75% (changes according to Glass specification chosen) 51% (changes according to Glass specification chosen)
Light Reflection

13%

19%

Haze

5%

96%

Switching speed

<15ms

50ms

Electrical Input

110V AC

0V

Power Consumption

3.5-5W/sqm

0W

Current

175mA/sqm

0A

* Values may change from time to time, especially as a new generation of films are developed. Please use these parameters as a guide only